IEEE C57.12.51-2008
$49.83
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements
| Published By | Publication Date | Number of Pages |
| IEEE | 2008 | 29 |
New IEEE Standard – Superseded. This standard is intended to set forth characteristics relating to performance, limited electrical and mechanical interchangeability, and safety of the equipment described, and to assist in the proper selection of such equipment. Specific rating combinations are described in the range from 750/1000 to 7500/10 000 kVA inclusive, with high-voltage 601 to 34 500 volts inclusive and low-voltage 208Y/120 to 4160 volts inclusive. Part I of this standard describes certain electrical and mechanical requirements and takes into consideration certain safety features of 60-Hz, two-winding, three-phase, ventilated dry-type transformers with self-cooled ratings 501 kVA and larger, generally used for step-down purposes. Part Il describes other requirements or alternatives which may be specified for some applications and lists forced-air-cooled ratings for certain sizes.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | IEEE Std C57.12.51-2008 Front Cover |
| 3 | Title Page |
| 4 | Abstract/Keywords |
| 6 | Introduction Notice to users Laws and regulations Copyrights Updating of IEEE documents |
| 7 | Errata Interpretations Patents |
| 8 | Participants |
| 9 | Contents |
| 11 | Important Notice 1. Overview 1.1 Scope 1.2 Purpose |
| 12 | 2. Normative references 3. Definitions 4. Usual service conditions 5. Ratings and characteristics 5.1 Kilovolt-ampere ratings |
| 13 | 5.2 Kilovolt-ampere and voltage ratings 5.3 Taps 5.4 Insulation levels |
| 14 | 5.5 Angular displacement and terminal markings |
| 15 | 5.6 Percent impedance voltage 6. Construction 6.1 Insulation system 6.2 Accessory location |
| 16 | 6.3 Nameplate 6.4 Transformer connections |
| 17 | 6.5 Tap changing 6.6 Lifting, jacking, and moving facilities |
| 18 | 6.7 Ground pad |
| 19 | 6.8 Transformer enclosure |
| 20 | 7. Routine tests 8. Tolerances 9. Other ratings and characteristics 9.1 Forced-air-cooled ratings |
| 21 | 9.2 40 Ā°C average ambient temperature conditions 9.3 Other winding temperature rises 9.4 Other temperature class insulation systems |
| 22 | 9.5 Other high-voltage ratings and connections |
| 23 | 9.6 YāY connected transformers |
| 25 | 9.7 Increased neutral insulation 9.8 Other basic lightning impulse insulation levels |
| 26 | 10. Other construction 10.1 High-voltage connection arrangements 10.2 Low-voltage connection arrangements 10.3 Surge arresters |
| 27 | 10.4 Unit substation application 10.5 Temperature devices 10.6 Forced-air cooling 10.7 Provision for future forced-air cooling |
| 28 | 10.8 Space heaters 10.9 Current transformers (or provision for their addition in the future) 10.10 Terminal blocks 10.11 Contacts 11. Other tests |
| 29 | Annex A (informative) Bibliography |
Related products
-
IEEE C57.12.01 2006
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/orā¦
-
IEEE C57.12.34-2009
IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 5 MVA and Smaller; Highā¦
-
IEEE C57.12.24 2009
IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19ā¦
-
IEEE C57.12.35 2007
IEEE Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators Published By Publication Dateā¦
-
IEEE C57.12.37 2006
Standard for the Electronic Reporting of Distribution Transformer Test Data Published By Publication Date Numberā¦
-
IEEE C57.12.23-2018
IEEE Standard for Submersible Single-Phase Transformers:250 kVA and Smaller; High Voltage 34 500 GrdY/19 920ā¦
-
IEEE C57.12.44-2000
Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEE 2000ā¦
-
IEEE C57.12.36 2008
IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.91-2001
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers Published By Publication Date Numberā¦
-
IEEE C57.12.44 2006
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEEā¦
-
IEEE C57.12.91 2001
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers Published By Publication Date Numberā¦
-
IEEE C37.12.1 2018:2019 Edition
IEEE Recommended Practice for Instruction Manual Content of AC High-Voltage Circuit Breakers above 1000 Vā¦
-
IEEE C57.12.60-2009:2013 Edition
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distributionā¦
-
IEEE C57.12.40-2006
IEEE Standard for Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid-Immersed) Published Byā¦
-
IEEE C57.12.60-2009
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distributionā¦
-
IEEE C57.12.35-2007
IEEE Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators Published By Publication Dateā¦
-
IEEE C57.12.23-2009
IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 Vā¦
-
IEEE C57.12.36-2007
IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.28 2005
Standard for Pad Mounted Equipment – Enclosure Integrity Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.00 2007
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Dateā¦
-
IEEE C57.12.44-2005
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEEā¦
-
IEEE C57.12.40 2006
Standard for Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid-Immersed) Published By Publicationā¦
-
IEEE C57.12.59 2002
IEEE Guide for Dry-Type Transformer Through-Fault Current Duration Published By Publication Date Number of Pagesā¦
-
IEEE C57.19.01-2000
IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings Published By Publication Date Numberā¦
-
IEEE C57.12.38-2009
IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers; High Voltage, 34 500 GrdY/19 920 Vā¦
-
IEEE C57.12.20 2005
Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts andā¦
-
IEEE C57.12.32-2002
IEEE Standard for Submersible Equipment – Enclosure Integrity Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.23 2009
IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 Vā¦
-
IEEE C57.12.38 2009
IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers; High Voltage, 34 500 GrdY/19 920 Vā¦
-
IEEE C37.12.1 2008
IEEE Guide for High-Voltage (>1000 V)Circuit Breaker Instruction Manual Content Published By Publication Date Numberā¦
-
IEEE C57.12.29-2005
IEEE Standard for Pad Mounted Equipment – Enclosure Integrity for Coastal Environments Published By Publicationā¦
-
IEEE C57.12.24-2009
IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19ā¦
-
IEEE C57.12.80 2002
IEEE Standard Terminology for Power and Distribution Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.51 2009
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-ā¦
-
IEEE C57.12.80-2002
IEEE Standard Terminology for Power and Distribution Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.29 2005
Standard for Pad Mounted Equipment – Enclosure Integrity for Coastal Environments Published By Publication Dateā¦
-
IEEE C57.12.31 2003
IEEE Standard for Pole Mounted Equipment – Enclosure Integrity Published By Publication Date Number ofā¦
-
IEEE C57.12.01-2005
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/orā¦
-
IEEE C57.12.31-2002
IEEE Standard for Pole Mounted Equipment – Enclosure Integrity Published By Publication Date Number ofā¦
-
IEEE C57.12.28-2005
IEEE Standard for Pad-Mounted Equipment – Enclosure Integrity Published By Publication Date Number of Pagesā¦
