ISO 19976-1:2019
$27.95
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 1: Flame atomic absorption spectrometric method
Published By | Publication Date | Number of Pages |
ISO | 2019-07 | 18 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows:
a) for copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %;
b) for lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %;
c) for zinc sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,05 % to 0,30 %.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2019-07 |
Pages Count | 18 |
Language | English |
Edition | 1 |
File Size | 1.2 MB |
ICS Codes | 73.060.99 - Other metalliferous minerals |
Related products
-
ISO/TR 19972-1:2009
Hydraulic fluid power — Methods to assess the reliability of hydraulic components — Part 1:…
-
BSI PD CEN ISO/TR 9241-100:2023
Ergonomics of human-system interaction – Overview of ISO 9241 software ergonomic standards Published By Publication…
-
ISO 2440:1997/Amd 1:2010
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1 Published By…
-
ISO 3400:1997/Amd 1:2009
Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method — Amendment 1 Published…
-
DIN EN 13203-3:2021 Edition
Solar supported gas-fired domestic appliances producing hot water – Appliances not exceeding 70 kW heat…
-
AGMA 2015-2-B15
Gear Tooth Flank Tolerance Classification System – Definitions and Allowable Values of Double Flank Radial…
-
ISO/TS 16976-1:2015
Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates…
-
BSI PD ISO/TS 16976-1:2015
Respiratory protective devices. Human factors – Metabolic rates and respiratory flow rates Published By Publication…
-
ISO 2631-1:1997/Amd 1:2010
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1:…
-
BS EN 280-1:2022
Mobile elevating work platforms – Design calculations. Stability criteria. Construction. Safety. Examinations and tests Published…
-
ISO 8359:1996/Amd 1:2012
Oxygen concentrators for medical use — Safety requirements — Amendment 1 Published By Publication Date…
-
ISO 19916-1:2018
Glass in building — Vacuum insulating glass — Part 1: Basic specification of products and…
-
BS EN ISO 3386-1:1997+A1:2010
Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression – Low-density materials Published By…
-
AS ISO 19976.1:2020
Copper, lead and zinc sulfide concentrates – Determination of cadmium – Flame atomic absorption spectrometric…
-
ISO 19926-1:2019
Meteorology — Weather radar — Part 1: System performance and operation Published By Publication Date…
-
ISO 3822-3:1997/Amd 1:2009
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
BS ISO 10294-1:1996+A1:2014:2015 Edition
Fire resistance tests. Fire dampers for air distribution systems – Test method Published By Publication…
-
ISO 8727:1997/Amd 1:2015
Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems — Amendment 1 Published…
-
ISO 19973-1:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures…
-
IEC 60704-2-7:2020
Household and similar electrical appliances – Test code for the determination of airborne acoustical noise…
-
JIS R 3420:2013
Testing methods for textile glass products Published By Publication Date Number of Pages JIS 2013-02-20…
-
BSI PD CEN ISO/TR 9241-100:2023 – TC
Tracked Changes. Ergonomics of human-system interaction – Overview of ISO 9241 software ergonomic standards Published…
-
ISO 19976-2:2019
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion…
-
ISO 3386-2:1997/Amd 1:2010
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density…
-
BS ISO 19916-1:2018
Glass in building. Vacuum insulating glass – Basic specification of products and evaluation methods for…
-
BS EN ISO/IEC 19796-1:2009
Information technology. Learning, education and training. Quality management, assurance and metrics – General approach Published…
-
BSI 13/30275203 DC:2013 Edition
BS ISO 1996-1. Acoustics. Description, measurement and assessment of environmental noise. Basic quantities and assessment…
-
ISO 2407:1997/Amd 1:2016
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy —…
-
CIE 231:2019
CIE Classification System of Illuminance and Luminance Meters Published By Publication Date Number of Pages…
-
ISO 19967-1:2019
Heat pump water heaters — Testing and rating for performance — Part 1: Heat pump…
-
CSA ISO 19906:20:2020 Edition
Petroleum and natural gas industries – Arctic offshore structures Published By Publication Date Number of…
-
BS ISO 19976-2:2019
Copper, lead and zinc sulfide concentrates. Determination of cadmium – Acid digestion and inductively coupled…
-
BS ISO 19976-1:2019
Copper, lead and zinc sulfide concentrates. Determination of cadmium – Flame atomic absorption spectrometric method…
-
BSI 21/30426931 DC:2021 Edition
BS EN 13203-3. Solar supported gas-fired domestic appliances producing hot water. Appliances not exceeding 70…
-
BS EN ISO 2039-1:1997
Plastics. Determination of hardness – Ball indentation method Published By Publication Date Number of Pages…
-
ISO 7711-1:1997/Amd 1:2009
Dental rotary instruments — Diamond instruments — Part 1: Dimensions, requirements, marking and packaging —…
-
BS ISO 19926-1:2019
Meteorology. Weather radar – System performance and operation Published By Publication Date Number of Pages…
-
ISO 1996-1:2016
Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and…
-
ISO 4287:1997/Amd 1:2009
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture…